When we try to clean our house it gets super bad and we end up getting way too much tired. Cleaning a whole house can be a pain in your butt, to be honest. So people did what we do best to try to get technology work for us. We all got a vacuum cleaner that did make it easy and at starting, people were really enjoying it. We were like now we don’t have to bend and keep cleaning. But after a while, we again did what we do the best complained. Gosh, it’s so hard to work with a vacuum cleaner we have to carry it everywhere and do the work ourselves also it comes with a cord. Then we did what we do the best people invented a great vacuum that don’t need your help at all and can work easily without you touching it. It’s the modern vacuum cleaner that works on its own a robot that cleans your house without getting you up to your bed. Yes, the best thing to make humans lazy we created a robot to do all our work for us. So after this launched we did what do best, question and I’m sure you questioned too, how does it work? Well to tell you that we did what we do best, is the answer you thought this article.
What is a robot vacuum?
Also known as a robovac, the robot vacuum cleaner is a vacuum cleaner comes with an intelligent vacuum programming that can sense your whole house and clean what needs to be clean with the help of its sensors and let you get the best cleaning experience. The vacuum also can clean the deepest corners and also the right spots that even we cannot, or that we find very difficult to clean.
The clear advantage of robot vacuum cleaner over the traditional and normal vacuum cleaners is that it can clean on its own, does not take much space too. The disadvantage of the robot vacuum cleaner is that it takes time to clean as its smaller and can’t get much dust in its bag as a normal vacuum cleaner would. The robot vacuum cleaner is also more expensive than the normal one which is okay as the technology is advanced.
So, how does it work?
Just like us, when we are trying to walk we take input through our eyes of surroundings and send it to our computer that is our brain and then the brain gives an output. In which we later tend to avoid things, the same way the robot vacuum works too. The robot vacuum cleaner has its own sensors for different outcomes. The sensor that is in onboard ones lets them move freely avoid accidents, let them move through paths while cleaning, also it navigate the new place where cleaning is required.
While they were made as small as they can so they can get into every place and clean almost every place of your house. From under the bed to the corners of your walls. So I was saying that they had different sensors so let’s check them out.
Wall sensors
This is done with its infrared sensors that send infrared frequency waves to detect the object. It is used to avoid any bump and accident with walls and also to make sure the cleaning of every spot is done and to take care of the corners and other spots of the walls. So you will see sometimes your robot moving along the wall by sensing it and removing the dirt and cleaning your room from all sides. The robot can use a fixed pattern to clean some kind of walls after sensing the position of the walls. Which are already programmed in it by the inventors so it has a pattern that you will notice after seeing it work for some time? The sensors can be useful when you are cleaning some really tight spots.
Obstacle sensors
A lot of you must have been thinking everything is okay but how the vacuum knows if there is a ball or a shoe or something there that is in its way. Which is a nice question as they can be the biggest obstruction while cleaning for a robot? To sense the sofa, dining table, chair, and your kid’s toys. Just for this problem, the inventors have places sensors on the bumpers which are the shock-absorbing bumpers. So as the robot has sensors in the bumper so when it bumps into some object it’s just changed its direction and starts cleaning again in opposite directions. Where some of the inventors also provide a sensor where the robots will move on the soft surface like carpet and curtains so it won’t leave the trace of dirt while it moves. So they can push through those soft objects instead of going all the way over.
Cliff sensors
This is the one that makes robots safe from breaking when a robot is cleaning and coming down the stairs or near the stairs. If he fell off it will be dangerous for it can result in breaking the vacuum cleaner. So it uses the cliff sensors that are your infrared sensors beneath the robot to make sure that it does not happen. So when it notices there is a change in the level of the floor it will automatically back off before it fell off.
Wheel sensors
This one makes the robot to measure the circumstances and the distance that the robot covers also know the wheel rotation of its own wheels. This is just to make sure it cleaned all the spots in the room when he went.
Dirt sensor
The sensors are basically used to sense if the spot has a huge amount of dirt and dust. So it can clean it, and also if he left some dirt after cleaning the sensor will not let him leave until it’s all clean.
Andreas Johnson, a successful musician, has turned his attention to social media. He combines his love for music with his interest in online platforms to help artists shine on the digital stage.